NEW Fisher XV2
NEW Fisher XV2
7-1/2' Fisher XV2 Stainless Steel- Call For Pricing!
8-1/2' Fisher XV2 Mild Steel- Call For Pricing!
8-1/2' Fisher XV2 Stainless Steel- Call For Pricing!
9-1/2' Fisher XV2 Mild Steel- Call For Pricing!
9-1/2' Fisher XV2 Stainless Steel- Call For Pricing!
A New Standard in V-Plow Performance
Featuring extreme flared wings and Fisher Engineering’s proven trip edge design, the XV2™ delivers outstanding performance while getting you smoothly over hidden obstacles – in all blade configurations – without losing your load. Super-fast hydraulics maximize productivity while the standard InstaLock double-acting cylinders hold wings firmly in place for clean back-dragging and straight blade operation.
- 1992-present Ford F250-550/Excursion
- 1995-present Ford F700/800
- 2000-present Ford F650
- 1988-present Chevy Silverado 2500/3500/Suburban 2500
- 1988-present GMC Sierra 2500/3500
- 1990-present Chevy/GMC C4500/5500/Kodaik/TopKick
- 1994-present Dodge Ram 2500/3500
- 2008-present Dodge Ram 4500/5500
- 2008-present Sterling Bullet 4500/5500
- 2008-present Isuzu NPR
- 1998-present Mitsubishi FG
All Fisher plows come with all necessary truck parts, installation, 2-year factory warranty and Boondocker Service Discount. Shipping is available for extra.
ACCESSORIES FOR THIS PLOW
For use on your LD, SD, HT, XLS, XtremeV, or XV2 plows where surfaces are rocky and/or abrasive. This will extend the life of the cutting edge and/or base angle.
This plow cover is constructed of heavy duty nylon, and includes a gathered elastic band sewn into the bottom edge for a tight, weather resistant fit. This long lasting cover takes just seconds to install and provides protection for your snowplow's electrical and hydraulic systems.
If backdragging is part of your plowing requirements, optimize your performance by adding these, simple to bolt-on 1/4" edges to your XtremeV plow. (XtremeV backdrag edge is not compatible with curbguard or shoe kits.)
Extend the length and improve the overall operating performance of your plow by adding a pair of blade wings. Wings extend at a 35 degree angle, increasing the overall length of each blade wing by 6".
Attractive,"off-season" bumper/grille guard designed for use with either the FISHER Minute Mount or Minute Mount 2 System pushplates. Easy 10 minute bolt-on installation and no drilling required. Mounting brackets double as pushplate covers/skid plates and includes tabs for mounting auxiliary fog lamps. FOG LAMPS NOT INCLUDED
Be prepared with this handy parts box! Box contains the high volume, genuine factory parts needed for most emergency repairs. Packed in an easy-to-store plastic toolbox with lots of extra room for your tools.
Whether you plow snow with a small pickup or a class-8 highway truck with a wing blade, Timbren Industries has a Suspension Enhancement System (SES) kit designed to provide safety and stability under the toughest conditions.
Timbren has proven to be reliable even in areas where the heaviest snowfalls occur. Timbren SES products are specified by municipal, state and highway departments for all snow removal equipment.
SES products are designed and tested in Canada.